Parts

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Making brakes that slow you down is easy, but making them light, powerful, efficient and adjustable is Avid's specialty. That's exactly what you get with their Single Digit 5 Rim Brake. The reversible noodle lets you use it front or rear, while its low weight won't hold you back on climbs. The Single Digit is impressively durable for super-smooth action season after season and it even comes with grippy brake pads to stop you with authority.

- Wide tooth profiling prevents chain drop without a chainguide - Compatible with 9/10/11 speed chains, allowing a 1x setup on most drivetrains - Constructed in Canada from 7075 aluminum

- Thermoplastic Beavertail protects chainring from impacts - For 1X and 2X drivetrains

- Lightweight All-Mountain/Enduro 1X chain guide - Constructed from 6061 T-6 alloy and molded thermoplastic - Captive hardware for easy installation and adjustment - Not compatible with 104BCD x 30t chainrings - Integrated Beavertail bashguard - 123g (26-32t)

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 41 and 42mm lower headset bearings - Compatible with 30mm (1-1/8") straight steerer tubes - Durable steel construction

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: IS42/28.6/H9/K|IS42/30/H1 • Top Type: IS - Integrated • Top Head Tube Inside Dia.: 42.00mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 9mm (Short), 15mm (Tall) • Top Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 72g

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: ZS56/30/H4/K • Bottom Type: ZS - ZeroStack • Bottom Head Tube Inside Dia.: 55.95mm • Crown Race Seat Dia.: 30.015mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 4mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 88g

More comfort, more control. Lightweight EVA foam and cork combine with a contemporary knurled texture twist – offering a stylish, comfortable, and durable finish to your bike. Where it thrives: The open road, gravel roads What it's built for: Grip, durability Highlights: - Comfortable, lightweight EVA foam absorbs road-buzz and feels great - Natural cork elements and debossed knurled pattern for better grip in all conditions / Includes: 2x tape rolls, lever strips, bar end-plugs, and finishing strips - Thickness: 2.7mm, length: 200cm, weight: 82g

Get a grip. A straight profile, lock-on grip that combines a ribbed, mushroom pattern on the palm side for comfort, and hex-pattern on the underside for grip. Where it thrives: Challenging trails, out in the elements What it's built for: Control, grip Highlights: - Mushroom ribs for comfort and control - Micro-Hex pattern for all-weather grip - Single lock-on clamp for security

The Format is our first single clamp grip for those who like to make use of the full width of their bars, allowing you to run your hands right up to the edge. We had found some single clamp grips suffer from additional twisting, which is why we designed the sleeve to snugly fit the bars towards the ends. After examining wear patterns of grips that have been through the ringer, we implemented several different patterns and zones into the format to deal with the different dynamics going on in each part of your hand.

The Dagga is our brand new DH pedal. It was designed in collaboration with Chris Kovarik – one of the forefathers of downhill and flat pedal riding. Kovarik's unique and high-impact riding style inspired the Dagga's key features – our largest platform and widest stance ever. - Meant to be ridden with thick-soled shoes, the Dagga offers improved stability, power and articulation of the bike. - The Dagga features the same high strength chromoly axle system as other models with a double seal, inner bushing and outer cartridge bearing. - Largest Q-Factor, largest body, longest and largest amount of pins!

- Polyurethane layer is anti-slip with high tensile strength for long-term performance - Availabe in new graduated color fades to add even more style and personalization to your bike - GEL is vibration damping and shock absorbing to minimize fatigue and strain due to real-world riding conditions - Reliable and reusable Lock-In bar end plugs

- Uniquely formulated synthetic leather with Chameleon series colorway on the iridescent textures of the drops blend into the sleek, satin black, leather-like finish of the tops for a look that exudes speed and character and for superb grip and handling performance - Multi-layer, multi-density foam improves shock absorption while dampening vibration to effectively minimize fatigue - Highly elastic and lightweight organic adhesive will not leave residue on the handlebars to ease installation and adjustment - Reusable, expanding locking bar plugs are reliable and resistance to falling out - Highly elastic finishing tape does not deform, degrade or soften in extreme temperature and weather conditions

Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability. - SPD compatibility - Weight (pair): 30g - Float: 6 degrees - Release angle: 15 or 20 degrees

Crank Brothers' most versatile pedal. The Candy excels at it all—cyclocross, XC, trail, and all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. Specs: - Spindle material: Forged scm 435 chromoly steel - Body material: 6061-T6 aluminum - Wing material: Stamped steel - Spring material: 300 series stainless steel - Release angle: 15° / 20° - Q-factor: 52mm - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Cleat: Premium brass cleats with shims included - Weight: 355g per pair - Warranty: 5 years

For enduro riding and racing, it's all about the Crank Brothers Mallet E pedals. Winner of a Design & Innovation Award for 2016, this pedal features a concave platform for a secure, grippy foothold, and six adjustable pins per side for even more security. The adjustable traction pad interface keeps you in contact with the pedal so you can focus on your line. Four-sided entry ensures your foot will catch quickly and easily, as well as helping the Mallet E shed mud like no other. A 52mm q-factor is your best friend on tight trails, because who wants to be clotheslined by a tree? Not you, that's for sure. Throw in chamfered edges to ward off rock strikes, and a customizable float and release system and you're ready to shred. Specifications: - spindle material: forged scm 435 chromoly steel - body material: 6061-T6 aluminum - wing material: 17-4PH stainless - spring material: 300 series stainless steel - release angle: 15° / 20° - q-factor: 52mm - inner bearing type: igus LL-glide bearing - outer bearing type: enduro cartridge bearing - adjustable pins: 6 per side for grip - endcap: hex alloy - cleat: premium brass cleats with shims included - weight: 419g per pair

DEITY Grip Clamps offer a way to customize your bike to match your style.

The Knuckleduster features a tapered internal sleeve that you have to tap onto your handlebar for full engagement. This tapered sleeve feels like it is already locked into place once fully tapped onto the bar and coupled with a single bolt lock-on clamp, you will not develop any play. The body of the grip combines the best elements of a half-waffle, mushroom ribbing, and an ergo feel. Featuring a mushroom pattern to minimize vibration. The Knuckleduster grips are an all day grip that allow you to keep it Pinned Wide Open at all times.

The DEFTRAP will revolutionize what you should expect from a nylon composite pedal with it's non-offset symmetrical platform to offer added stability behind the spindle, a true concave pedal profile so your feet sink into it, 10 total pins (8 replaceable cr-mo pins and 2 molded pins), our tried and true sealed bearings and DU bushing system, and top tier nylon and glass fiber composite material to create a pedal that feels unlike anything on the market. With a focus on ride quality, increased foot support, added stability, leading traction, ability to skim over rocks, and even coming in 10 colors-the DEFTRAP will challenge you to rebel against the conventional perception that a value pedal cannot rival the best pedals on the market!

DEITY Racepoint handlebars must pass DEITY specific impact and stress testing based on the rate of deflection product goes through in real world situations. This is just the beginning, every DEITY handlebar also undergoes a rigorous 12 to 24 month real world testing process under the most abusive riders in the world. Gradient Butting Technology allows DEITY to put material where we need it and not where we don’t, delivering a significantly stronger handlebar at a similar weight to other bars. - Intended use: Enduro and DH

Dimension Stem Column Adaptors - Total quill length 180mm - Measurement from minimum insertion to top of steerer adaptor is 118mm - Alloy - Quill insertion diameter: 1-inch

Dimension Two-Bolt Seatposts provide a sturdy and durable saddle perch for cross country and all-mountain riding in three diameters, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - 0mm offset

Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp. - 31.8mm can be used with 26.0 bars with additional shim (SM5317) - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Weight: 130g-180g

Dimension Steerer Extender adds 2 to 3-1/4" height to steerer. - Extender clamps to steerer; stem clamps to extender - Adds 2 to 3-1/4-inch height to threadless steerer - Includes top cap and long bolt - 40mm of threadless steerer is required for proper installation - Do not stack steerer extenders; no more than one steerer extender recommended per bike - WARNING: Dimension Steerer Extender is not recommended for use on forks with carbon fiber steerers

More support with more comfort Why not combine the best? With the GA3, the winged grip has proven its genius to the All-Mountain world. The special thing about the GP1's off-road cousin is, he locks on tight with a lightweight inner clamp. The concept combines all the relief benefits of the wing and actively supports your wrist. Your freedom of movement and the accompanying bike control remains fully intact. Riding pleasure guaranteed! What exactly are the benefits of the wings on the grips? The longer a ride is, the harder it is for a rider to maintain the ergonomically correct hand position on the bike. As a result, riders often bend their wrists too much, stressing nerves and tendons and inhibiting blood circulation. Numbness and pain in your hands are often the undesirable consequences. The GA3 grip optimizes the hand position through the Miniwings and prevents over-bending in your wrist. What is the carpal tunnel? The carpal tunnel is an anatomic passage in your wrist for nerves and tendons running from the lower arm to the hand. If the wrist is bent too much the nerves become constricted, which often leads to pain and numbness. The GA3 with Miniwing is based on the well-established and proven design of the MTB-specific GA2 grips. The particular shape of the grips provides you with great comfort and grip, without compromising the freedom of movement. This allows you to have all the control you need to tackle the most demanding of trails with full confidence. As an ergonomically perfected expansion of the GA-series by Ergon, the primary purpose GA3 grips is to provide relief out in the trail. But, they're not only perfect for the MTB category, they are also ideal on fitness-oriented and urban bikes. The ergonomic winged-grip GA3 is available in five striking colors. Ergon grips don't just feel great, they look great, too!

FSA PowerPro JIS Cartridge Bottom Brackets. - Includes bolts - Spindle Interface Type: Square Taper JIS - BB Shell Width (mm): 68 - BB/Frame Interface: English

This FSA MegaExo bottom bracket is for use MTB MegaExo cranksets with 24mm spindles. - Sealed bearings - Die-cast then CNC machined alloy bearing cups - Composite Di2-compatible adjustable center sleeve

- Left and right bottom bracket cups with standard bearings for FSA MegaExo cranks - BB-9050 is for 24mm spindle 68/73mm MTB K-Force and Team Issue cranks - BB-8681 for K-Force Light (a non-ceramic option) and SLK Light Road MegaExo cranks (BB-8681 bearing covers have been redesigned so that the spindle now rides directly on the bearing itself) - BB-7000 is for 24mm spindle 68/73mm shell MTB Gravity Lite, Moto X and Afterburner cranks - BB-7000 is for 24mm spindle 83mm shell MTB Gravity Lite cranks - BB-6200 is for 24mm spindle 68mm shell Energy, Gossamer and Omega No Bolt Design cranks - BB-6000 is for 24mm spindle 68mm shell Energy, Gossamer and Omega cranks - BB-4000 is for 19mm spindle 69mm shell Omega cranks - BB-1000 is for 19mm spindle 68/73mm MTB Gamma cranks - 1.37" x 24tpi (English threads) or M36 x 24tpi (Italian threads)

- No. series headsets offer excellent performance and value - No. 8b: 36x45 degree Cane Creek Integrated, or No. 10: Zero Stack shallow available for 1-1/8" applications - No. 10 S.H.I.S.: ZS44/28.6|ZS44/30 - No. 8B S.H.I.S.: IS42/28.6|IS42/30 - Stack: 5.2mm/3.7mm (No. 10), 8mm/1mm (No. 8B) - Color: Black - Weight: 93g (No. 10), 74g (No. 8B)

Cane Creek compatible integrated style bearings fit directly into headtube. - Crown Race: 30 - S.H.I.S. Lower: IS41 - S.H.I.S. Upper: IS41 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless

Fi'zi:k's line of Vento tapes are race bred for ultimate control and reduced weight. Microtex is the thinnest option for pin-sharping handling and control. Its tacky finish aids a sticky nonslip surface with a raised texture for ultimate grip in every condition. - Microtex construction 2mm thick - Tacky touch

Fi'zi:k's line of Vento tapes are race bred for ultimate control and reduced weight. Solocush is their most streamlined cushioned construction – a single-layer chunky platform to rest on during longer rides without compromises on weight. - Tacky finish adds a sticky nonslip surface with a raised texture for ultimate grip in every condition. - Solocush construction 2.7mm thick

Fi'zi:k's line of Terra bar tapes are designed for those who go off-road on drop bars. Bondcush is a layered mid-padding polymer foam that aids the absorption of road buzz. Bonded to a microtex outer layer this material blend is Fi'zi:k's chunkiest option that combines comfort, versatility, and durability, ideal to tackle all kind of roads. A sticky gel backing serves two functions: it replaces the adhesive tape for an easy removal during cleaning and damps off-road chatter without feeling too squishy. - Bondcush construction 3mm thick - Gel backing - Tacky touch

Translucent resin pedals add a touch of style to your BMX bike. - Polyurethane body - Molded pins - Chromoly spindle

Alloy platform pedals with molded pins. - Chromoly spindle - Powder-coated

Free Agent 2-piece BMX crankset. - Heat treated 4130 chromoly - Floating axle for precise chain alignment - BB bearings and cups sold separately

Make sure your young rider is pedaling right with Giant's Plastic Juvenile Pedals. - 1/2-inch spindles

-Seatpost clamp for Defy/Avail Aluxx models (2015-2016)

COMFORT CONTROL Designed for Downhill and Enduro riding, the Giant’s swage series grips have several Giant-only designs from inner tube to grip surface. The exclusive integrated tube featuring a rear hollow design combines thicker rubber in the palm and a unique web pattern for the fingers to provide superior control and ergonomic comfort. - Ergo hand-fit design features a thicker rubber compound in the palm and webbed design for comfort and enhanced damping - Giant-proprietary rubber compound increases control in any condition - Multi-grip surface combination improves friction for better control - Weight: 115g

• Grooved heat-dissipating back plate design • Durable organic pad compound • Quiet and powerful braking performance for all weather conditions

• Embossed Giant logo • Non-slip suede surface • Anti-vibration Gel absorbs shock for increased comfort • Includes Giant logo end-plugs and Giant finishing tape

- 100% SPD-SL compatible - Front and rear of the cleats can be changed separately for exact and quick replacement - High traction walking surface - Mounting hardware included - 380000038 offers 6 degrees of float (Black/Yellow)

Seatpost lever and cable set for Giant's Contact Switch Seatpost

- Slim and lightweight nylon composite body built tough for DH and enduro riding - Concave shape and 9 molded pins for maximum grip - Durable chromoly steel spindle - Sealed cartridge bearing for smooth long-lasting performance - Weight: 350g

Giant's Original MTB Core Platform Pedals are a treat for your mountain-riding feet. The wide, stable aluminum platforms have a scalloped shape with 10 replaceable and adjustable traction pins for an awesome grip. And, for excellent durability, there are heat-treated boron steel axles and quality bearings. - 9/16-inch spindles

CONFIDENCE UPGRADE Designed for performance road riders. The all-new Stratus Lite bar tape provides impressive comfort and superior grip thanks to the omnidirectional surface coding. At 70g, Stratus Lite is one-third lighter than the original version, and it’s easier to wrap and replace thanks to the new adhesive backing. FEATURES: - High-friction PU material with omnidirectional texture design offer superior anti-slip and hand feel - Ultralightweight, 33% lighter than previous Stratus - Unique gel adhesive backing is washable and reusable and provides easier wrapping - Length (2160mm), Width (30mm), Thickness (3mm) - Weight: 73g

Giant's Connect Comfort+ Saddle is ideal for shorter commutes and weekend fitness rides. Its center zone cut relieves pressure so you are comfortable while you ride. Plus, the water-resistant synthetic top and steel rails make this one tough, durable saddle.

Find comfort with Giant's wide Connect City Saddle. The light, water-resistant synthetic top and steel rails withstand all the city commutes and short rides you plan on doing.

Giant's Contact Comfort Saddle is the perfect addition to your hybrid or commuter bike. It features a pressure-relieving base for amazing comfort as you pedal. And, with its lightweight, water-resistant synthetic cover and tough chromoly rails, this saddle is bound to last.

Giant's Contact Comfort+ Saddle is the perfect addition to your hybrid or commuter bike. It features a pressure-relieving base and center zone cut so you'll be comfortable while riding. And, with its lightweight, water-resistant synthetic top and tough chromoly rails this saddle is bound to last.

Giant's Contact City+ Saddle is comfortable enough for you to enjoy commuting around town and durable enough to withstand city riding. It features a pressure-relieving base and center zone cut so you're ride will feel smooth. And, with its lightweight, water-resistant synthetic top and tough chromoly rails this saddle is bound to last.

A versatile, lightweight dual-sided pedal designed for use with flat soled or SPD-compatible shoes. - Dual sided cage for clipless SPD and flat soled shoes. - CNC machined Cr-Mo spindle . - LSL sealed ball bearing . - Adjustable spring tension. - Shimano SPD compatible.

Featuring an optimal surface area for maximum engagement with a minimalist profile for maximum clearance, the all-new Pinner Pro flat pedal series is purpose built for the rigors of aggressive trail, enduro and DH shredding. - Maximized concave surface area (2mm) combined with a minimalist profile for secure, efficient pedaling action. - Durable forged A380 aluminum platform withstands the toughest impacts. - Tough chromoly steel spindle for long lasting stability. - 10 replaceable and adjustable metal pins (per side) for maximum foot engagement and security. - Sealed cartridge bearing for smooth long-lasting performance.

Jagwire Locking Bar End Plugs safely and securely finish the end of the handlebar. - Screw-type plugs fit carbon fiber, aluminum, and steel handlebars with 18-23mm inner diameter - Sold as a pair

Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions.

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC and Shimano 10-speed chains - Includes 2 pairs

The Z8.1 chain features inner plate chamfering and a z-bridge shape, making it suitable for a variety of riding styles. - Inner plate chamfering to smooth shifting - Z-bridge shape - Links (links): 116 - Width: 7.1 mm - Drivetrain Speeds: 6, 7, 8 - Chain Connection Type: Reusable Master Link